iTENDO²
01.00|Ident-Nr. 1494155|en
26
4.2.2
Function description
SCHUNK TENDO hydraulic expansion toolholders are designed for clamping rotationally tools.
The tool shank is inserted into the clamping
–
Ø.
The tool is clamped by screwing in the clamping screw.
The electronics built into the tool holder allows the detection of vibrations during machining. With
the App on the Tablet, you can see transmitted data of the sensor. The acceleration data are being
transmitted via 2,4 GHz wireless connection interface.
