Basic safety notes
01.00|Ident-Nr. 1494155|en
18
2.16
General dangers
General:
•
Maintain safety distances
•
Never disable safety devices
•
Remove the energy supply lines before installation, conversion, maintenance and adjust-
ment work. Make sure that there is no residual energy in the system.
2.16.1
Safety for use and mounting
Improper handling and assembly:
Improper handling and assembly may result in hazards from the product that can lead to serious
injuries and considerable damage to property.
•
All work must be carried out by qualified personnel only.
•
Observe the applicable accident prevention regulations.
•
Use suitable assembly and transport equipment and take precautions against pinching and
crushing.
2.16.2
Safety for commissioning and operation
Falling and ejecting components:
Falling and ejecting components can lead to serious injuries or even death.
•
Only use the iTENDO² on machines with a closed safety guard.
•
Observe the legitimate speed range of the iTENDO² tool holder (see technical data)
