SCHUNK 1487754, Сборка и руководство по эксплуатации

Страница: 16 / 40

Installation
16 01 | Matrix-Plate SMPL | Assembly- and Operating Manual | en-US | 0489081
• Mounting using a vise
The Matrix-Plate is clamped directly in the vise.
• Mounting using a zero-point clamping system
There are threads for holding clamping bolts on the underside
of the Matrix-Plate.
6.3 Pneumatic connection
Matrix-Plate Recommended suction capacity of the
vacuum generator Recommended
vacuum generator
1x SMPL 300x200 At least 6 m³/h or 100 l/min SVAGG 6
1x SMPL 400x300 At least 12 m³/h or 200 l/min SVAGG 6 / SVAGG 18
1x SMPL 600x400 At least 18 m³/h or 300 l/min SVAGG 18 / SVAGG 40
2x SMPL 600x400 At least 48 m³/h or 800 l/min SVAGG 40 / SVAGG 63
The vacuum generator used should achieve the specified suction
capacity.
NOTE
The specified suction capacities are guide values.
The required suction capacity depends primarily on the total
surface area of the Matrix-Plate(s) used.
Special circumstances such as porous, uneven or poorly sealing
workpieces require a more powerful vacuum generator.
This vacuum must be constantly monitored using appropriate
safety features.
The SCHUNK vacuum unit (> see the chapter “Accessories”)
intended for operation with the Matrix-Plate is already equipped
with the necessary safety features.
• Connect the mounted Matrix-Plate to the vacuum generator.
Use the vacuum connection kit included in the delivery for this
purpose.
• Mount the gauge connection kit on a vacuum connection on the
side of the Matrix-Plate.
• Mount the gauge in the gauge connection kit at a suitable
position in/on the machine so that the vacuum level can be
read and checked.
The gauge must not be located in the path of flying chips or in
the cooling lubricant stream.
1. Shorten the hoses and pipelines as much as possible.
2. If the machine table is driven and can be moved or swiveled,
the travel path must be taken into account when routing the
hose line.