SCHUNK 0370550, Перевод оригинального руководства

Страница: 21 / 28

Maintenance and Care
02.02|PWG-S 40 - 80|en 21
Maintenance and Care
Notes
Original spare parts
When replacing damaged parts (wearing parts/spare parts) only
use SCHUNK original spares.
It is of advantage to have maintenance performed and the seals
replaced at SCHUNK. If this is not possible, you can perform the
maintenance and replace the seals yourself.
To replace parts, send the complete gripper with a repair order to
SCHUNK.
In the case of the PWG-S 80, the piston and body must be aligned
and mounted with a device during the assembly.
• Description for the assembly of the PWG-S
(

9.4, Page 23)
• Drawing for the construction of the device
(

10, Page 26)
• Assembly drawings
(

10, Page 26)
Maintenance and lubrication intervals
NOTICE
At ambient temperature above 60°C the lubricants can
harden faster.
• Interval decrease accordingly.
Maintenance- and lubrication interval
Size 40 - 80
Interval [Mio. cycles] 2
9
9.1
9.2
www.comoso.com