Schulte SMR-600, Руководство оператора, Страница: 62 / 76

OPERATION
SMR-600 04/21 Operation Section 4-22
© 2019 Alamo Group Inc.
O
PE
R
AT
IO
N
12. TRANSPORTING THE SKID STEER AND WINDROWER
Inherent danger of operating the skid steer and windrower and the possibility of accidents are not left behind
when you finish windrowing an area. One must also use good judgement and safe operation practices when
transporting the skid steer and windrower between locations, By using good judgement and following safe
transport procedures, the possibility of accidents while moving between locations can be substantially
minimized.
If equipped with a floating mount, ensure the locking pin is securely in place before
transporting.
Before transporting the skid steer and windrower, idle the skid steer engine, disengage the auxiliary hydraulics
and wait for all implement moving parts to cone to a complete stop. When transporting, only raise the
implement enough to clear ground obstacles. Never raise the windrower to a height that impairs the operator’s
vision to the front of the windrower
12.1 Transporting Skid Steer on Public Roadways
Periodically inspect all moving parts for wear and replace when
necessary with authorized service parts. Look for loose fasteners, worn
or broken parts, and leaky or loose fittings. Make sure all pins have
cotter pins and washers. Serious injury may occur from not maintaining
this machine in good working order.
(SG-21)
Never allow children or other persons to ride on the Power Unit or
Implement. Falling off can result in serious injury or death.
(SPU-16)
Never allow children or other persons to ride on the Power Unit or
Implement. Falling off can result in serious injury or death.
(SPU-16)
Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in such a way as to be
clearly visible and legible. When transporting the Equipment use the Power Unit flashing
warning lights and follow all local traffic regulations.
(SPU-13)