Schulte SDX-102 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 104

background image

OPERATION

SDX-102 05/19

Operation Section 4-4

© 2019 Alamo Group Inc.

OPERA

T

ION

2. OPERATOR REQUIREMENTS

Safe  operation  of  the  unit  is  the  responsibility  of  a  qualified  operator.   A  qualified  operator  has  read  and
understands  the  implement  and  tractor  Operator’s  Manuals  and  is  experienced  in  implement  and  tractor
operation and all associated safety practices.  In addition to the safety messages contained in this manual,
safety  signs  are  affixed  to  the  implement  and  tractor.    If  any  part  of  the  operation  and  safe  use  of  this
equipment is not completely understood, consult an authorized dealer for a complete explanation.

If the operator cannot read the manuals for themselves or does not completely understand the operation of the
equipment, it is the responsibility of the supervisor to read and explain the manuals, safety practices, and
operating instructions to the operator.

Safe operation of equipment requires that the operator wear approved Personal Protective Equipment (PPE)
for the job conditions when attaching, operating, servicing, and repairing the equipment. PPE is designed to
provide operator protection and includes the following safety wear:

PERSONAL PROTECTIVE EQUIPMENT (PPE)

•

Always Wear Safety Glasses

•

Hard Hat

•

Steel Toe Safety Footwear

•

Gloves

•

Hearing Protection

•

Close Fitting Clothing

•

Respirator or Filter Mask (depends on operat-

ing conditions)

OPS-U- 0002

DO NOT use drugs or alcohol immediately before or while operating the
Tractor  and  Implement.  Drugs  and  alcohol  will  affect  an  operator’s
alertness  and  coordination  and  therefore  affect  the  operator’s  ability  to
operate the equipment safely. Before operating the Tractor or Implement,
an operator on prescription or over-the-counter medication must consult
a medical professional regarding any side effects of the medication that
would  hinder  their  ability  to  operate  the  Equipment  safely.  NEVER
knowingly allow anyone to operate this equipment when their alertness or
coordination is impaired. Serious injury or death to the operator or others
could result if the operator is under the influence of drugs or alcohol.

(SG-27)

«
...
44
45
46
47
48
...
»

Содержание SDX-102









































































































Отзывы:

Нет отзывов

Похожие инструкции для SDX-102

Бренд: Echo Страницы: 54

Бренд: Echo Страницы: 32

Бренд: Echo Страницы: 24

Бренд: Echo Страницы: 8

Бренд: Echo Страницы: 5

Бренд: Echo Страницы: 24

Pro Attachment ES-210

Бренд: Echo Страницы: 27

Бренд: Echo Страницы: 28

Бренд: Gartenmeister Страницы: 36

Бренд: EGO Страницы: 120

Бренд: Harper Страницы: 93

Бренд: Ego Power+ Страницы: 28

Бренд: Jonsered Страницы: 272

Бренд: Cub Cadet Страницы: 56

Бренд: PowerBase Страницы: 30

Pro Landscaping DCM587

Бренд: DeWalt Страницы: 136

Polar Blast 4510

Бренд: Troy-Bilt Страницы: 52

Бренд: Weed Eater Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды