SC10U
27
English
11.1 Universal Intercom Pairing
The SC10U can be paired with non-Sena Bluetooth headsets for
Bluetooth intercom conversation. You can pair the SC10U with only
one non-Sena Bluetooth headset so if you pair with a different non-
Sena Bluetooth headset, the previous pairing will be removed.
1. Turn on the SC10U and a non-Sena Bluetooth headset that you
want to pair with.
2. Press and hold the (+) Button or the (-) Button for 10 seconds to
enter the configuration menu. Tap the (+) Button until you hear a
voice prompt,
“Universal intercom pairing”
. Tap the (-) Button
to enter into Universal Intercom Pairing mode and the blue LED
will flash rapidly and you will hear multiple beeps. Please refer to
section 14.16, “Universal Intercom Pairing” for more details.
3. Perform the operation required for handsfree pairing on the
non-Sena Bluetooth headset (refer to the User’s Manual for the
headsets you want to use). The SC10U will automatically pair with
a non-Sena Bluetooth headset when each are in pairing mode.
11.2 Two-way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as
you would between other Sena headsets. Within the intercom menu,
you may single tap the (-) Button to begin an intercom conversation
with the first intercom friend, double tap with the second intercom
friend, and triple tap with the third intercom friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom
connection, by activating the voice dialer or using the redialing
operation. You may also disconnect the existing connection by using
the operation to end a call (refer to
the User’s Manual for the headsets
for voice dialer, redialing, and ending a call).