SCHOTT VisiLED MC 1000, Руководство пользователя

Страница: 66 / 104

GB
64
Parameter setting for MC 1500
Precise setting of the parameters only
by computer control of the MC 1500.
The MC 1500 controller’s keypad only
allows rough visible adjustment.
* The values indicated with * can only
be changed via computer.
➔
The values indicated with
➔
are
derivative values that cannot be
directly set.
Properties Values
Tested in
accordance with
Light
intensity setting
brightness ranges
MC 1500:
1 = No LED lit up
2 = One green LED
3 = Two green LEDs
4 = Two green and
one yellow LED
5 = Two green, one
yellow and one
red LED
% 0 – 100
0 – 1
2 – 32
33 – 59
60 – 82
83 – 100
Base
setting
32%
Rotation mode
Angle of single
rotation step
illumination time
of each step*
➔
Rotation
speed*
ms
45°
2 – 500
➔
0.25–62.5 rps
125 ms
➔
1 rps
Strobe mode
Strobe cycle
duration
➔
Strobe frequency
Strobe pulse duration
Strobe
intensity*
µs
µs
%
100 – 65 000,
(full intensity from on 500 µs)
➔
Strobe frequency
15 – 2000 Hz (10 000 Hz)
80 – 65 000
0 – 100 without overdrive
0 – 300, if overdrive
conditions fulfilled
(see Section 8.6)
deaktiviert
40 000
➔
20 Hz
2500
300
Trigger mode
Light pulse duration
Light pulse
intensity*
Delay time*
µs
ms
80 – 65 000
0 – 100 without overdrive
0v300, if „pulse duration
< 10 000 µs“
0 – 16 000
(only limited settings pos-
sible via controller keypad)
deaktiviert
2500
300
10 00
Flash mode
Flash duration µs 80 – 65 000 2500