Quick Start Guide | SLI-5460 / SLI-5460-I | 2010-03
14
●
18
© Internetagentur Schott GmbH, 2010. All rights reserved.
Internetagentur Schott GmbH
Cent-Hoheneichstr. 11
D-96191 Viereth-Trunstadt
Tel. +49 9503 8099999 (DE)
Tel. +49 9503 8099998 (EN)
Fax.+49 9503 50440690
www.satspeed.com
2.3.4. Power Supply
Plug the supplied power supply to the wall jack and the other side to the IAD. Please note
that the plug type may differ according to different countries.
2.4. Checking the LEDs
Once you have connected all cables as described above, push the Power button to
switch on the device. After 2 minutes the device will be ready and accessible. This is also
indicated by the LEDs in the front of the device.
Up to now the three LEDs circled below should lit green.
