Return Material
Authorization (RMA)
D20980.022 Rev C
CV-LS User Manual
Page 91
Return Material Authorization (RMA)
Troubleshooting
If you are unsuccessful at resolving the following conditions, contact SCHOTT North America or your
sales representative.
CAUTION
Do not attempt to repair the Light Source Removing the cover will void the warranty.
Problem
Reason/Measure
Indicator LED on front panel does
not light up.
Check for power connected to the Light Source.
Indicator LED on front panel is ON
continuously, but LED output is
dark.
Check polarity settings in software.
Indicator LED blinks
Fault exists. Use software interface to query reason.
Communications over Ethernet
not possible even though network
jack lights are flashing.
Ensure the Ethernet communication settings are correct.
Technical Support
If the Troubleshooting section does not resolve your issue, contact technical support at:
[email protected]
If technical support cannot help you resolve your issue remotely, you may need to return your unit
under an RMA number. Technical support may suggest you elevate your RMA request to the
engineering level. Make sure to mark this on your form to receive this service (additional fees may
apply).
Содержание ColdVision
Страница 36: ...D20980 022 Rev C CV LS User Manual Page 36 LED LED UV UV LED RMA 91...
Страница 38: ...D20980 022 Rev C CV LS User Manual Page 38 1 SCHOTT SCHOTT machine vision moritex com...
Страница 42: ...D20980 022 Rev C CV LS User Manual Page 42 LED LED UV UV LED Return Material Authorization RMA 91...
Страница 44: ...D20980 022 Rev C CV LS User Manual Page 44 SCHOTT SCHOTT machine vision moritex com...