CV-LS Dashboard
D20980.022 Rev C
CV-LS User Manual
Page 59
Controls (USER Level)
The Controls section contains all of the settings pertaining to how the LED operates. There are a few
differences in how the Dashboard and Web Interface behave. When the Dashboard is only connected
via USB or RS232, the Controls page is static. To see the settings currently in the unit, the user must click
the “Refresh Page” button at the top of the window.
Note:
The “Refresh Page” button will only be shown when the Dashboard is connected to the unit by
USB only.
If the Dashboard is connected via Ethernet, or if using the Web Interface, the window is continuously
updating itself. For instance, if a user were to change a setting from the Web Interface, those changes
would be immediately reflected in the Dashboard.
Note:
There is also a message at the top of both the Dashboard and Web Interface, reminding the user
that changes on these controls are not “Persistent” - meaning they will not be kept after a power cycle.
To keep the changed settings, the user must manually save them from the configurations page.
Figure 8: Controls (Left: Dashboard, Right: Web Interface)
All of the advanced operating modes for the LED can be accessed from this section. They are visually
broken down into sub-sections within the interfaces. Each sub-section will be explained below.
Note:
The CV-LS is a four channel device. Each channel can be controlled independently of the others.
Some of the features in the table below will not be needed in a single channel device.
Содержание ColdVision
Страница 36: ...D20980 022 Rev C CV LS User Manual Page 36 LED LED UV UV LED RMA 91...
Страница 38: ...D20980 022 Rev C CV LS User Manual Page 38 1 SCHOTT SCHOTT machine vision moritex com...
Страница 42: ...D20980 022 Rev C CV LS User Manual Page 42 LED LED UV UV LED Return Material Authorization RMA 91...
Страница 44: ...D20980 022 Rev C CV LS User Manual Page 44 SCHOTT SCHOTT machine vision moritex com...