Light Source Operation
D20980.022 Rev C
CV-LS User Manual
Page 48
Unit Mounting
The CV-LS comes pre-installed with four rubber feet on threaded posts. These are suitable for using the
unit on a flat surface to provide vibration reduction and keep the unit from slipping. These feet are
secured using light weight thread-locker to keep them from unscrewing during use.
To mount the unit using these threaded holes, the feet can be removed without damaging the unit. It is
normal, due to the thread-locker, for removal of the feet to require some amount of force.
Factory Resets
There are two forms of factory resets available. Both can be accessed through different methods.
Soft Reset
The soft reset will restore factory settings to the unit. This can be achieved by first applying power to the
unit, then holding the Power Switch for 10 seconds. Upon release, the unit will restore factory settings
and reboot. Note: This will also reset network settings.
The soft reset can also be accessed through the digital interfaces and is documented in the Technical
User Guide (See the
Error! Reference source not found.
section on page 94).
Hard Reset
The hard reset will restore factory firmware and factory settings. This can be achieved by first removing
power to the unit. While holding the Power Switch, apply power to the unit, and continue holding the
Power Switch for five seconds.
The Indicator light will come on for a five second interval. Release the Power Switch at any time within
this interval for the unit to perform a hard reset.
If the Indicator starts flashing twice per second, the five second interval has elapsed. Go back to the
beginning of the Hard Reset section.
Once the Indicator light starts flashing 10 times per second, the unit is restoring the factory firmware.
When the Indicator light stops flashing, the hard reset is complete.
Reset Failures
If at any point you have issues restoring the unit to factory settings, see the Return Material
Authorization (RMA) section on page 91 for additional instructions.
Содержание ColdVision
Страница 36: ...D20980 022 Rev C CV LS User Manual Page 36 LED LED UV UV LED RMA 91...
Страница 38: ...D20980 022 Rev C CV LS User Manual Page 38 1 SCHOTT SCHOTT machine vision moritex com...
Страница 42: ...D20980 022 Rev C CV LS User Manual Page 42 LED LED UV UV LED Return Material Authorization RMA 91...
Страница 44: ...D20980 022 Rev C CV LS User Manual Page 44 SCHOTT SCHOTT machine vision moritex com...
