SCHOTT ColdVision, Руководство пользователя

Страница: 10 / 94

Safety Information
D20980.022 Rev C CV-LS User Manual Page 10
Product Related Warnings
All relevant local safety regulations must be followed when installing and using this product. For safety
reasons, and to ensure conformity with assembly standards, only the manufacturer is authorized to
repair the components.
CAUTION
Never look directly at the LED output when on. LEDs have a very high luminance
that can cause eye injury. Do not look at beam with optical instruments.
Use Ultraviolet (UV) protective goggles when using a UV light source.
CAUTION
Light absorbing materials have the physical property of converting incident light into heat. Damage may
occur to heat sensitive or flammable light absorbing materials. To avoid such thermal damage and the
potential danger of fire or burns, please adhere to the following instructions:

Do not cover the light guide exit.

Do not place any part of your body in the light output path.

When illuminating heat sensitive or flammable light absorbing objects (e.g. in microscopy),
special care must be taken to keep an appropriate distance between the light guide and the
object(s). Special care must also be taken to select a suitable lamp brightness level in order to
avoid thermal damage to the object(s).

To avoid unnecessary strain on biological tissue caused by illumination with visible light, reduce
the brightness and duration of illumination to the absolute minimum level required.

Do not cover the front or rear vents when operating the unit. Air flow must be unrestricted to
allow full light output and maintain life of the LED.

Use only power cords with appropriate connectors for secure use.

Disconnect power cord when unit will be left unused for long periods of time.

Do not use this unit near any liquids, or in an area with excessive moisture.

Do not place flammable materials on or near the unit.

Use only standard glass cleaners. Do not use solvents, petroleum distillates, or any volatile or
flammable liquids or foams.

Never spill liquid on the unit.

Do not service the unit beyond what is described in this manual. Return the light source to an
authorized service center. For a Return Material Authorization (RMA), see page 91.