Legacy Protocol
Controls
D20980.026 Rev B
CV-LS Programming Guide
Page 17
3.2.6
Shut-Down Pin
&J#,#
Gets/Sets the behavior of the digital inputs on the Multiport connector. Default is Active
Low, where a low signal (GND) will turn off that channel of the LED.
First Input Option (#): 1 – 4 = Channel
Second Input Option (#): 0 = Active Low, 1 = Active High, ? = Query
Return string:
&jX,Y
Return value (
X
): 1 – 4 = Channel
Return value (
Y
): 0 = Active Low, 1 = Active High
3.2.7
Output Enable (Front Switch)
3.2.7.1
Legacy
&L#
Gets/Sets if the LED control loop is active. This is equivalent to pressing the button on
the front of the unit.
Input Options (#): 0 = Disabled, 1 = Enabled, ? = Query
Return string:
&lX
Return value (
X
): 0 = Disabled, 1 = Enabled
3.2.7.2
CV-LS
&L#,#
Gets/Sets if the LED control loop is active.
First Input Option (#): 0 = Common, 1 – 4 = Channel
Second Input Option (#): 0 = Disabled, 1 = Enabled, ? = Query
Return string:
&lX,Y
Return value (
X
): 0 = Common, 1 – 4 = Channel
Return value (
Y
): 0 = Disabled, 1 = Enabled
