Legacy Protocol
Controls
D20980.026 Rev B
CV-LS Programming Guide
Page 16
3
Controls
3.1
Control Mode
3.1.1
Last Command Interface
&M#
Gets which interface was the last to accept a command change to the system.
Input Options (
#
):0 = Front, 1 = Multiport, 2 = RS232, 3 = Legacy Socket,
4 = USB, 5 = Web Interface, 6 = Binary Socket, ? = Query
Return string:
&mX
Return value (
X
): 0 = Front, 1 = Multiport, 2 = RS232, 3 = Legacy Socket,
4 = USB, 5 = Web Interface, 6 = Binary Socket
3.2
LED Channel Settings
3.2.1
Demo Mode (RGBW Model Only)
&D#
Gets/Sets if the unit is operating in demo mode. This command is for RGBW units to
demonstrate color mixing possibilities.
Input Options (#): 0 = Disable, 1 = Enable, ? = Query
Return string:
&dX
Return value (
X
): 0 = Disable, 1 = Enable
3.2.2
Combined Trigger
&J0,#
Control to combine all inputs together. When enabled, input to any channel behaves as
if all inputs were wired together.
Input Option (#): 0 = Disabled, 1 = Enabled, ? = Query
Return string:
&j0,X
Return value (
X
): 0 = Disabled, 1 = Enabled
3.2.3
Knob Mode
&N#
Gets/Sets the function of the front knob.
Input Options (#): 0 = Common, 1 – 4 = Channel, 5 = Demo Mode,
? = Query
Return string:
&nX
Return value (
X
): 0 = Common, 1 – 4 = Channel, 5 = Demo Mode
3.2.4
Single Channel Operation
&B#
Gets/Sets if the driver is single or quad channel.
Input Options (#): 0 = Quad, 1 = Single, ? = Query
Return string:
&bX
Return value (
X
): 0 = Quad, 1 = Single
3.2.5
