Legacy Protocol
Configurations
D20980.026 Rev B
CV-LS Programming Guide
Page 15
2
Configurations
2.1
Persistent Memory
2.1.1
Save Settings
&S
Command forces the unit to store the current settings to non-volatile memory.
Return string:
&s
2.1.2
Restore Settings
&T
Command forces the unit to restore the current settings to those stored in non-volatile.
Return string:
&t
2.2
Factory Defaults
2.2.1
Restore All Factory Defaults
&O
This command causes the unit to return to all settings stored at the factory.
Return string:
&o
2.2.2
Restore Factory Defaults (Preserving Network Settings)
&O2
This command causes the unit to return to all settings stored at the factory, but will
keep the current network settings.
Return string:
&o2
2.2.3
Erase Exception Logs
&O3
This command causes the unit to erase any current exceptions from the log.
Return string:
&o3
2.2.4
Reboot System
&O4
This command causes the unit to reboot the processor. This has the same effect as
power cycling the unit.
Return string:
&o4
