5
Installation (continued)
4
Removing the mounting kits
□
Loosen the preassembled lift rod knob (G),
remove the accessorize cap (H), then loosen
the mounting nut (I) and remove the washers
(J & K) from the diverter valve body (O).
□
Adjust the rubber washer (L), metal washer (M)
and mounting nut (N) to the bottom of diverter
valve body (O).
5
Installing the diverter valve
body
□
From underneath the deck, insert the diverter
valve body (O) with the rubber washer (L),
metal washer (M) and mounting nut (N) through
the hole.
□
From above, place the rubber washer (K), metal
washer (J) and thread the mounting nut (I) onto
the diverter body (O).
6
Securing the diverter valve
body
□
From above, tighten the mounting nut (I) to
make the diverter valve body (O) expose about
two thread positions out the top end of the
mounting nut (I).
□
From underneath the deck, secure the diverter
valve body (O) with the rubber washer (L),
metal washer (M) and mounting nut (N) so that
the rubber washer (K) sits flush against the
finished deck surface.
G
H
I
J
K
L
M
N
O
O
L
M
N
I
J
K
O
I
J
K
L
M
N
www.schonsimplymodern.com
Please contact (800) 880-8164 for further assistance.