29
GB
Automatic cleaning using the
Automatic cleaning using the
Automatic cleaning using the
Automatic cleaning using the
Automatic cleaning using the
PYROLYTIC cycle
PYROLYTIC cycle
PYROLYTIC cycle
PYROLYTIC cycle
PYROLYTIC cycle
During the PYROLYTIC cycle, the internal
temperature of the oven reaches 500°C. When the
pyrolytic cycle is activated, food and grime residues
are burnt away. Dirt is literally incinerated.
Keep children away from the appliance during the
automatic cleaning cycle as surfaces may become
very hot. Particles may ignite inside the oven as a
result of the combustion process. There is no cause
for concern: this process is both normal and hazard-
free.
!
The oven advises the user when it is necessary to
perform a cleaning cycle; the display shows the text
“PYROLYTIC recommended - START?”; select “yes”
to set the desired cleaning cycle level.
Before initiating the PYROLYTIC cycle:
• remove large or coarse food residues from the
inside of the oven using a damp sponge. Do not
use detergents;
• remove all the accessories, the guide rails and the
supporting frames;
• do not place tea towels or pot holders over the
oven handle.
!
If the oven is too hot, the pyrolytic cycle may not
start. Wait for the oven to cool down.
!
The cycle may only be started once the oven door
has been closed.
To activate the PYROLYTIC cycle, press the
button followed by the “MENU” button.
1. Select the PYROLYTIC command and press “OK”.
2. Select the desired PYROLYTIC cycle level by
adjusting the or buttons. The PYROLYTIC cycle
has three default time settings which cannot be
modified:
1. Economy (ECO): duration 1 hour;
2. Normal (NOR): duration 1 hour and 30 minutes;
3. Intensive (INT): duration 2 hours.
Press the “OK” button to confirm.
Press the “START/STOP” button to begin the
PYROLYTIC cycle.
Safety devices
Safety devices
Safety devices
Safety devices
Safety devices
• the door is locked automatically as soon as the
temperature exceeds a certain value;
• if a malfunction occurs, the heating elements will
be switched off;
• once the oven door has been locked, you cannot
change the duration and end time settings.
!
Programming is possible only after selecting the
PYROLYTIC cycle mode.
Programming delayed automatic cleaning
Programming delayed automatic cleaning
Programming delayed automatic cleaning
Programming delayed automatic cleaning
Programming delayed automatic cleaning
1. Press the button.
2. Select the END command and press “OK” to
confirm.
3. The 4 numerical digits will begin to flash.
4. Adjust the values using the
–
and
+
buttons.
5. Press the “OK” button to confirm.
6. Press the “START/STOP” button to enable the
programming process.
7. When the cooking time has elapsed, a buzzer sounds
and the oven switches off.
• For example: it is 9:00 a.m. and the Economy
PYROLYTIC cycle has been selected: default set
duration 1 hour. 12:30 is scheduled as the end
time. The programme will start automatically at
11:30 a.m.
The message “waiting for pyrolytic” shows that a
programme has been scheduled. The display shows
the pyrolytic cycle end time and the duration
alternately.
To cancel programming, switch the oven off .
Once the automatic cleaning cycle is over
Once the automatic cleaning cycle is over
Once the automatic cleaning cycle is over
Once the automatic cleaning cycle is over
Once the automatic cleaning cycle is over
You will have to wait until the temperature inside the
oven has cooled down sufficiently before you can
open the oven door. You will notice some white dust
deposits on the bottom and the sides of your oven;
remove these deposits with a damp sponge once
the oven has cooled down completely. Alternatively,
you can make use of the already heated oven, in
which case it is not necessary to remove the
deposits, they are completely harmless and will not
affect your food in any way.
