GBA Z 0675 2 E
BA
Page 11 of 29
November 9, 2020
Last revised 11-2020
Rev. 2
Scho
ll Ap
parat
eb
au
G
mb
H &
C
o
.
KG
3.4.2 I
NSTALLATION CLIPPING MODEL
BH/HO/IN
2400
CNS
Cut-out CNS-frame in top plate: 557x357 mm
Advice for installation heat retention plate:
As soon as the mounting devices according to the above mentioned steps are finished, you may continue
with installation. Put the heat retention plate with coil and ceran surface into the clipping. Install the
mounting construction on the working area and seal it with Pactan. The connecting cables have a length of
2.5m. The connecting cable must be laid and must not be rolled up.
