11
2.6 Unpacking
Unpack the tension meter and inspect it for any shipping damage. Notices of defect must
be announced immediately, in writing, at the latest within 7 days on receipt of the goods.
2.5 Delivery Includes
1x Sensor
1x USB cable (only Code USB)
1x Operating Instructions
2.4 Optional Accessories
Code
SW-TI3
:
Tension Inspect 3 software for PC evaluation of readings
Codes
EK0640
and
EK0643
: Cable for connection to PC (only Code 232)
3 Initial Setup and Operating Procedure
3.1 Notes Before Starting Measurement
Tensions that exceed the tension range of the instrument by more than 100%
may cause permanent damage to the measuring spring and must be avoided
under any circumstances.
HANS SCHMIDT & Co GmbH provides no warranty or liability for self-made
cables.
The model number, the serial number, the calibration label (option) and the
SCHMIDT Quality Seal are provided on the cylindrical portion of the sensor.
3.2 Mounting possibilities
Sensors of FS series can be mounted in different ways:
- Mounting by using the frontplate on a cylindrical hole (panel cut out R 19 mm,
Length 54 mm)
- Mounting on a flat platform
M4
fig. 3.2
M3
