EFA stunning device Original operating instructions
EN
Rev.01
– 01.2021
16 of 28
Fig. 6.2
– Stunning points
Fig. 6.4
– Operation (VB 316)
2
1
3
3
3
Fig. 6.3
– Operation (VB 215, VB 225)
3
4
1
2
6.2.2
Working
Caution!
The operator's head must be
positioned to the side of the
device in order to avoid injury in
case of possible kick back of the
stunning device!
VB 215
and
VB 225
(see Fig. 6.3 and Appendix -A1-)
1) Operate the release lever (1) on the handle (2) and place the
cattle stunner with the safety button (3) on the animal's head.
2) Pressing the safety button triggers the shot.
3) After the shot has been fired, release the release lever (1)
immediately and lift the device off the animal's head.
4) The cattle stunner is then ready for operation again.
VB 316
(see Fig. 6.4 and Appendix -A1-)
1) Operate the release lever (1) on both handles (2) and place the
cattle stunner with the safety bush (3) on the animal's head.
2) Pressing the safety button triggers the shot.
3) After the shot has been fired, release the release lever (1) at both
handles immediately and lift the device off the animal's head.
4) The cattle stunner is then ready for operation again.
Caution!
Place the device on the head of
the animal for stunning (
), as
shown in Fig. 6.2
– Stunning
points.
