schmersal SLC 220 IP 69 K, Руководство по эксплуатации

Страница: 8 / 14

8 EN
SLC 220 IP 69 K
SLG 220 IP 69 K
Operating instructions
Safety light curtain / safety light grid
3.5 Dimensions
All measurements in mm.
SLC 220 IP69K default transmitter and receiver
60
B
31
24
18
38
A
C D
23
42
Legend
A Protection field height
B Sensor length
C Mounting dimension
D Total length
Type A B C D
SLC 220-E/R0175-xx-69-RFB 175 241.5 289.5 325.5
SLC 220-E/R0250-xx-69-RFB 250 304 352 388
SLC 220-E/R0325-xx-69-RFB 325 379 427 463
SLC 220-E/R0475-xx-69-RFB 475 529 577 613
SLC 220-E/R0625-xx-69-RFB 625 679 727 763
SLC 220-E/R0775-xx-69-RFB 775 829 877 913
SLC 220-E/R0925-xx-69-RFB 925 979 1027 1063
SLC 220-E/R1075-xx-69-RFB 1075 1129 1177 1213
SLC 220-E/R1225-xx-69-RFB 1225 1279 1327 1363
SLC 220-E/R1375-xx-69-RFB 1375 1429 1477 1513
SLC 220-E/R1525-xx-69-RFB 1525 1579 1627 1663
SLC 220-E/R1675-xx-69-RFB 1675 1729 1777 1813
All versions with resolution 30 and 80 mm as well as variant (-H) range
from 4.0 to 14.0 m have identical dimensions with the same protection
field height.
For the SLC 220-E/R0175-30-69-RFB type, the dimension changes
from 23 mm to 35,5 mm due to the extended profile length. The protec-
tion field is marked with an individual marking.
SLG 220 multi-beam transmitter and receiver
60
B
31
24
18
38
A
C D
23
42
82
70
L2
L1
Legend
A Beam distance
B Sensor length
C Mounting dimension
D Total length
Type A L1 L2 B C D
SLG 220-E/R0500-02-69-RF 500 330 318 604 652 688
SLG 220-E/R0800-03-69-RF 400 230 218 904 952 988
SLG 220-E/R0900-04-69-RF 300 230 218 1004 1052 1088
L1 = Mounting distance (mm) between fixing surface and centre slotted
hole (short end cap)
L2 = Mounting distance (mm) between fixing surface and centre slotted
hole (diagnostic window)