schmersal CSS 34F0 Скачать руководство пользователя страница 12

12

EN

CSS34F-

E

-DE

Operating instructions

Safety sensor

CSS 34F0

CSS 34F1

9. EU Declaration of conformity

Name of the component:

CSS 34F0

CSS 34F1

Type:

See ordering code

Description of the component:

Non-contact safety sensor

Relevant Directives:

2006/42/EC

2014/30/EU

2011/65/EU

Machinery Directive

EMC-Directive

RoHS-Directive

Applied standards:

EN 60947-5-3:2013

ISO 14119:2013

EN ISO 13849-1:2015

EN 61508 parts 1-7:2010

EN 62061:2005 + AC:2010 + A1:2013 + A2:2015

Notified body for the prototype test:

TÜV Rheinland Industrie Service GmbH

Alboinstr. 56, 12103 Berlin

ID n°: 0035

EU-type examination certificate:

01/205/5194.02/19

Person authorised for the compilation  

of the technical documentation:

Oliver Wacker

Möddinghofe 30

42279 Wuppertal

Place and date of issue:

Wuppertal, 13. November 2019

Authorised signature

Philip Schmersal

Managing Director

EU Declaration of conformity

Original

K.A. Schmersal GmbH & Co. KG

Möddinghofe 30

42279 Wuppertal

Germany

Internet: www.schmersal.com

We hereby certify that the hereafter described components both in their basic design and construction conform 

to the applicable European Directives. 

The currently valid declaration of conformity can be  

downloaded from the internet at www.schmersal.net.

K.A. Schmersal GmbH & Co. KG

Möddinghofe 30, 42279 Wuppertal

Germany

Phone 

+49 202 6474-0

Fax 

+49 202 6474-100

E-Mail: [email protected]

Internet:   www.schmersal.com

Содержание CSS 34F0













Отзывы: