5
AZM190
Operating instructions
Solenoid interlock
EN
Power to unlock
Power to lock
AZM190-02/02RK
AZM190-02/02RKA
11
12
41
42
E2
E1
21
22
31
32
E2
E1
11
12
41
42
21
22
31
32
AZM190-11/02RK
AZM190-11/02RKA
E2
E1
11
12
41
42
33
34
21
22
11
12
41
42
E2
E1
21
22
33
34
AZM190-11/11RK
AZM190-11/11RKA
E2
E1
41
42
13
14
21
22
33
34
21
41
42
13
14
E2
E1
22
33
34
AZM190-02/11RK
AZM190-02/11RKA
E2
E1
31
32
41
42
13
14
21
22
21
41
42
13
14
E2
E1
22
31
32
Key
A
Positive break
Monitoring the interlock according to ISO 14119
5. Set-up and maintenance
5.1 Functional testing
The safety function of the safety components must be tested The
following conditions must be previously checked and met:
1 Fitting of the solenoid interlock and the actuator
2 Check the integrity of the cable entry and connections
3 Check the switch enclosure for damage
5.2 Maintenance
A regular visual inspection and functional test, including the following
steps, is recommended:
1 Check for tight installation of the actuator and the switch
2 Remove particles of dust and soiling
3 Check cable entry and connections
Adequate measures must be taken to ensure protection
against tampering either to prevent tampering of the safety
guard, for instance by means of replacement actuators
Damaged or defective components must be replaced.
6. Disassembly and disposal
6.1 Disassembly
The safety switchgear must be disassembled in a de-energised
condition only
6.2 Disposal
The safety switchgear must be disposed of in an appropriate manner
in accordance with the national prescriptions and legislations