3
ASM E1-R2
ASM E2-R2/R2
Operating instructions (short version)
AS-i safety monitor
EN
3. Mounting
3.1 General mounting instructions
The AS-i monitor is fitted in the control cabinet onto 35 mm DIN rails
to EN 50022.
Mounting accessories
As the AS-i safety monitor is a safety component, the configuration
interface CONFIG and the button operation can be sealed to prevent
unauthorised acces. To that effect, the device is supplied with a
transparent cover with attachment hook for installing a seal wire once
the monitor is fitted.
Note
The transparent cover with attachment hook must always be installed,
considering that it offers a good protection against electrostatic
discharges (ESD) and the penetration of foreign particles into the
RJ45 connector CONFIG of the configuration interface of the AS-i
safety monitor.
3.2 Dimensions
Device dimensions (H/W/D): 105 x 45 x 120 mm
Mounting
d
c
a
b
B
A
C
D
A, B, C, D: coded
U = 0 V
Sealing
