Schmeiser TILL AN'PAK TPP3510, Руководство по эксплуатации и запасным частям

Страница: 17 / 44

TP Hydraulic Transport Kit
Ph. (559) 268-8128
Fax (559) 268-3279
www.tgschmeiser.com
17
T.G. Schmeiser Co., Inc.
Detaching From Tractor
1. Move the Till An’ Pak Hydraulic Transport Kit to a level
storage location. Park the tractor, place the
transmission in park or neutral, and apply the parking
brake. Shut down the engine, and remove the key
before exiting the tractor.
2. Make sure the implement is resting securely on the
ground or blocks before attempting to disconnect it
from the tractor. Use extreme care to keep feet and
hands from under the Till An’ Pak and clear of any
pinch points caused by the tractor hitch arms and
Hydraulic Transport Kit’s hitch pin.
3. Remove the pin from the Hydraulic Transport Kit hitch.
4. Disconnect the lift arms and drive the tractor away
MAINTENANCE
WARNING
Understand Safety Procedures!
Read and understand all safety procedures
described in this manual before performing any work
on or around the implement.
Wheel Hub Bearings
Re-pack with grease once a season – inspect bearings
and races for wear and replace if necessary.
Lubrication Points
Add grease to the locations shown.
Service Items
Hydraulic Hoses (Optional)
Inspect all hydraulic hoses and fittings for leaks or signs
of wear. Replace any that are overly worn or damaged.
Tires (Optional)
Check tire pressure and set to tire manufacturer’s
recommended specifications. Inspect the tires for wear
and/or damage. Make sure the wheel lugs are tightened
to the proper torque
.