Schmeiser TILL AN'PAK TPP3510, Руководство по эксплуатации и запасным частям, Страница: 16 / 44

T.G. Schmeiser Co., Inc. TP Hydraulic Transport Kit
Ph. (559) 268-8128
Fax (559) 268-3279
www.tgschmeiser.com
16
Implement Break-In
Although there are no operational restrictions on
the Till An’ Pak Hydraulic Transport Kit when used for
the first time, it is recommended that the following
mechanical items be checked:
1. After 1/2 hour of operation:
a. Check all fasteners and tighten if necessary.
b. Make sure that the roller rings are in good
condition.
2. After 10 hours of operation:
a. Go to the normal servicing and maintenance
schedule, as defined in the Maintenance
Section.
General Operating Instructions
1. Familiarize yourself with the Operation and Parts
Manual, and make sure the Hydraulic Transport Kit is
properly attached to the tractor before beginning
work. Inspect the condition of the implement for
potential problems or damage. Do not use the
implement if it needs repairs of any type.
2. Clear the area of bystanders, especially small
children. Make sure that you can clearly see and
identify passersby, steep slopes, ditches, drop-offs,
power lines, debris, and foreign objects. If you are
unable to clearly see these type of items, discontinue
operating the Hydraulic Transport Kit.
3. Know the location of all underground cables,
pipelines, and other hazards in the area. Also make
certain that all irrigation heads, utility outlets, and
other obstacles are properly marked.
4. Watch for low hanging limbs, power lines, and other
overhead obstacles while you are operating. Use
care to avoid hitting these items.
5. Do not operate the Hydraulic Transport Kit, or drive the
tractor into material that is burning, or areas that
recently burnt and may contain hot spots. Tire
damage can occur when driving over hot material.
Oil and grease on the tractor and Hydraulic Trasport Kit
could ignite, resulting in equipment destruction.
6. Slow the tractor when making turns, and remember
that the Hydraulic Transport Kit is wider than the tractor
when turning.
7. Always operate safely and follow all the instructions in
this manual.
OPERATION
Attaching to Tractor
Use caution when connecting the Hydraulic Transport Kit
to the tractor. The Hydraulic Transport Kit should be
securely resting on the ground. Keep hands and feet
from under the implement and clear of pinch points
between the tractor drawbar and implement hitch.
WARNING
Understand Safety Procedures!
Read and understand all safety procedures
described in this manual before performing any work
on or around the implement.
Initial Setup Checklist
Efficient and safe operation of the Hydraulic Transport Kit
requires that every user read and understand the
operational instructions and all related safety instructions
outlined in this manual.
This checklist is provided for the user/owner. It is
important for both personal safety and to maintain the
mechanical condition of the Hydraulic Transport Kit that this
checklist is followed.
Make sure all hardware is
properly installed and
tightened. Refer to
“Maintenance Schedule” on
page 18.
Make sure the Hydraulic
Transport Kit is properly
mounted to tractor hitch. Refer
to “Attaching to Tractor” on
page 16.
Initial Setup Checklist (prior to using for the first time)
Location Task