Schmeiser TILL AN'PAK TPP3510, Руководство по эксплуатации и запасным частям, Страница: 11 / 44

TP Hydraulic Transport Kit
Ph. (559) 268-8128
Fax (559) 268-3279
www.tgschmeiser.com
11
T.G. Schmeiser Co., Inc.
If transporting or operating the tractor and implement
near a public roadway, the tractor must be equipped
with proper warning lighting and a Slow Moving Vehicle
(SMV) emblem, which are clearly visible from the rear of
the unit. Lights and a SMV emblem must be attached
directly to the implement if the visibility of the tractor
warning signals is obscured.
Never operate the tractor PTO with the PTO master
shield missing or in the raised position.
Rollover Hazard
To avoid serious injury or death from
falling off tractor, equipment runover,
rollover, or crushing:
1) Use ROPS equipped tractor .
2) Keep ROPS locked in the UP position .
3) Only operate the equipment when seated in the
tractor seat .
4) Always fasten seat belt when operating the tractor
and Implement .
ROPS and Seat Belt
Tractor Safety Devices
The tractor must be equipped with a Roll Over Protective
Structure (ROPS) (tractor cab or roll-bar) and seat belt to
protect the operator from falling off the tractor, especially
during a roll-over where the driver could be crushed and
killed.
Only operate the tractor with the ROPS in the raised
position and seat belt fastened.
WARNING
Crush Hazard
Use care when attaching the unit
to the tractor . Never place any
part of your body under the tongue or hitch assembly .
Do not allow anyone to stand between moving tractor
and implement during hook-up operations.
Prior to Connecting Unit
Make sure the unit is resting on the ground or the
transport lock is securely installed over the wheel
cylinder rod before attaching the unit to the tractor.
Attaching to Tractor
WARNING
Connecting to Tractor
Unexpected Separation Hazard
If towing the unit with a drawbar, use only a
certified, hardened drawbar pin with a retainer
clip . Do not use homemade pins, bolts, or any other
type of retaining device . Always install the retainer clip,
making sure the hitch and unit are securely fastened to
the tow vehicle .
Using a pin not intended for this type of towing can result
in unexpected separation of the unit from the tow
vehicle, resulting in equipment damage and personal
injury .
SAFETY INSTRUCTIONS
Connect implement hitch to the tractor properly.
Hydraulic Component Safety
WARNING
High-Pressure Fluid Hazard
Before applying pressure to the system,
make sure all components are tight and that
the hydraulic lines, hoses, fittings, and couplings are not
damaged .
Hydraulic Pressure
This unit operates with hydraulic pressures of
2500 to 3000 psi (170 to 205 bars) .
WARNING