Schmalz VOC-AD-S-100 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 42

Schmalz VOC-AD-S-100 Скачать руководство пользователя страница 30

MAINTENANCE

66 | EN

www.schmalz.com

30.30.01.00559/05

8 Maintenance

8.1 General safety information

Please read Chapter 1.6 (Requirements and information relating to the

installation, maintenance and operating personnel) before starting any maintenance work.

WARNING

Accident risk when maintenance is performed on the system by
unqualified personnel

Consequences include serious personnel injury and property damage

►

Only qualified personnel that have read and understood the

operating instructions may perform maintenance work on the system.

DANGER

Electric shock from contacting live parts

Risk of death due to electric shock

►

Work on the electrical installation may only be performed by an electrician.

►

Disconnect the electrical energy supply prior to assembly, adjustment and

maintenance activities and secure against restart.

►

Ensure that the power has been disconnected, earthed and short-circuited.

►

Do not connect or disconnect a live mains plug.

CAUTION

Risk of burns from contact with hot surfaces

Burns to the skin

►

Do not touch hot surfaces

►

Only perform maintenance work after allowing for a 1h cooling period

«
...
28
29
30
31
32
...
»

Содержание VOC-AD-S-100











































Отзывы:

Нет отзывов