Schmalz SXMPi, Руководство по эксплуатации

Страница: 28 / 66

Description of Functions
28 / 66 EN-US · 30.30.01.01721 · 01 · 09/19
7 Description of Functions
7.1 Overview of Functions
Description See section
Operating modes (> See ch. Operating Modes, Page 29)
Automatic mode, manual mode, setting mode and
restricted mode
Switching point setting (> See ch. Monitoring the System Vacuum and
Pressure and Defining Limit Values, Page 31)
Zero point calibration (> See ch. Calibrating the Sensors [0x0002], Page
32)
Energy-saving function, control function (> See ch. Control Functions [P-0: 0x0044], Page
32)
Blow-off function (> See ch. Blow-Off modes [0x0045], Page 33)
Defining blow-off time (> See ch. Setting the Blow-Off time [P-0:
0x006A], Page 34)
Display unit (> See ch. Selecting a Display Unit [0x004A], Page
34)
Switch-off delay (> See ch. Switch-Off Delay [0x004B], Page 34)
Display alignment (> See ch. Rotating the Display [0x004F], Page 35)
Eco mode (> See ch. ECO Mode [0x004C], Page 35)
PIN code, access authorizations (> See ch. Locking and Unlocking the Menus, Page
35)
IO-Link device access locks (> See ch. Restricting Access Using Device Access
Locks [0x000C], Page 36)
IO-Link extended device access locks (> See ch. Restricting Access with Extended Device
Access Locks [0x005A], Page 37)
Reset to factory settings (> See ch. Resetting to Factory Settings (Clear All)
[0x0002], Page 37)
Counter (> See ch. Counters, Page 38)
Software version (> See ch. Displaying the Software Version
[0x0017], Page 39)
Article number (> See ch. Displaying the Serial Number
[0x0015], Page 39)
Serial number (> See ch. Displaying the Part Number
[0x00FA], Page 39)
Production setup profiles (> See ch. Production setup profiles, Page 39)
Energy and Process Control (EPC):
Condition monitoring (CM)
Energy monitoring (EM)
Predictive maintenance (PM) (> See ch. Energy and Process Control (EPC), Page
40)
Voltage measurement (> See ch. Displaying the Operating Mode and
Supply Voltages (Slide Show), Page 22)
Warnings and errors (> See ch. Troubleshooting, Page 55)