Schmalz SMPi 20, Руководство по эксплуатации, Страница: 22 / 50

S
CHMALZ
SCP
I
/ SMP
I
4-22
Setting of switching points for the air-saving function with [H-1]
and [h-1]
The deactivation value
[H-1]
and hysteresis
[h-1]
of the air-saving function are set using
this function.
When the
[H-1]
deactivation value is reached or exceeded, then the H1 LED is also
switched on.
The switching points of the air-saving function are set as follows:

Press the button.

Enter a valid PIN if the menu is locked.

Select the desired
[H-1]
or
[h-1]
parameter using the or buttons.

Confirm by pressing the button.

Change the value using the or buttons.

Press the button to save the changed value.
The display automatically jumps to the next setting value.

When the or button is pressed for approx. 3 seconds, the value to be
changed is scrolled through quickly.

The value is not accepted when exited using the button.

The air-saving function is activated in the configuration menu with
[ctr=on]
and
deactivated with
[ctr=off]
.