Schmalz SCPS Скачать руководство пользователя страница 3

1  Important Information

1.1  Note on Using this Document

J. Schmalz GmbH is generally referred to as Schmalz in these Maintenance instructions.

These Maintenance instructions contain important notes and information about the different 
operating phases of the product:

Transport, storage, start of operations and decommissioning

Safe operation, required maintenance, rectification of any faults

The Maintenance instructions describe the product at the time of delivery by Schmalz.

1.2  The technical documentation is part of the product

1. For problem-free and safe operation, follow the instructions in the documents.

2. Keep the technical documentation in close proximity to the product. The documentation must be accessible

to personnel at all times.

3. Pass on the technical documentation to subsequent users.

ð

Failure to follow the instructions in these Maintenance instructions may result in injuries!

ð

Schmalz is not liable for damage or malfunctions that result from failure to heed these instructions.

If you still have questions after reading the technical documentation, contact Schmalz Service at:

www.schmalz.com/services

1.3  Warnings in This Document

Warnings warn against hazards that may occur when handling the product. This document contains three levels of
danger that you can recognize by the signal word.

Signal word

Meaning

WARNING

Indicates a medium-risk hazard that could result in death or serious injury if
not avoided.

CAUTION

Indicates a low-risk hazard that could result in minor or moderate injury if not
avoided.

NOTE

Indicates a danger that leads to property damage.

1.4  Symbol

This symbol indicates useful and important information.

ü

This symbol represents a prerequisite that must be met prior to an operational step.

4

This symbol represents an action to be performed.

ð

This symbol represents the result of an action.

Actions that consist of more than one step are numbered:

1. First action to be performed.

2. Second action to be performed.

1.5  Warranty

IMPORTANT!

A warranty claim can only be accepted if the product has been installed and used in accordance with its corre-
sponding operating and assembly instructions. In the case of inappropriate handling or use of force, any warranty
and liability claims shall be void.

Damage and defects resulting from inadequate maintenance and cleaning, improper use, repair or attempted re-
pair by unauthorized persons, as well as damage and defects resulting from alterations or modifications to the
product and from replaced parts or materials that do not conform to the original specification are excluded from
the warranty.

EN-US · 30.30.01.00962 · 01 · 01/22

3 / 9

Содержание SCPS










Отзывы: