Schmalz FMHD Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 60

background image

22 | EN

www.schmalz.com

30.30.01.01648/06

4 Transport and Mounting

WARNING

Improper securing of the load

Improper unloading and transport can result in personal injuries and damage to

property. Moving loads can tip over, fall or crush people. When lifting transport

units, parts can fall over, move or fall down. Danger to life and limb.

► Only transport loads that are sufficiently secured against slipping.

► Only transport/attach vacuum area grippers with corresponding lifting and at-

tachment equipment

► Ensure that all persons leave the hoist danger zone before the transport units

are lifted.

► Wear protective footwear and additional safety equipment if necessary.

► Only trained personnel who have received safety instructions may unload and

transport the product.

Delivery

4.1.1 Items Included in Delivery

For the exact items included in delivery, please refer to the order confirmation.
The delivery documents list the shipping weight and dimensions. Note the system weight and dimen-
sions when choosing suitable lifting equipment.

Note

The instruction manual is part of the system and must be kept with the system every
time it is relocated.

4.1.2 Checking for Completeness

Using the enclosed delivery documents, check the entire shipment to ensure that it is complete. Also
refer to our Terms and Conditions of Sale and Delivery.

4.1.3 Reporting Damage

After delivery of the shipment, damage due to faulty packaging or transport must be reported immedi-
ately to the carrier and J.Schmalz GmbH.

ATTENTION

Incorrect disposal of the system or individual components

Environmental damage

► Disposal according to national guidelines.

«
...
20
21
22
23
24
...
»

Содержание FMHD





























































Отзывы:

Нет отзывов

Похожие инструкции для FMHD

Бренд: FagronLab Страницы: 16

Бренд: XAG Страницы: 24

Бренд: BACtrack Страницы: 13

Бренд: Badgematic Страницы: 28

Бренд: BACtrack Страницы: 2

Бренд: MADRIX Страницы: 28

Бренд: BACTcontrol Страницы: 28

Бренд: Xebex Fitness Страницы: 15

Бренд: qeedo Страницы: 2

Бренд: EAW Страницы: 2

Бренд: abc Страницы: 28

Бренд: Taurus Страницы: 24

Aspect Q-CARD 100-4T

Бренд: idi Страницы: 38

Бренд: Raven Страницы: 48

Бренд: Pacific Страницы: 16

Бренд: Qu-Bit Electronix Страницы: 15

Бренд: Tar River Страницы: 26

Бренд: ZOLL Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды