Schlumbohm 110 0607 Скачать руководство пользователя страница 39

Страница: 39 / 44

Pilot²

Doc. No. 610 2221 v07

- 39 -

(*applicable with the ultrasonic extension module)

14. Error messages

For certain operating errors or malfunctions, the device

will display explanatory texts.

The following malfunctions are, for example, automatically

detected:

•

Battery only has 10% charge.

With

Quit

you confirm that you have read the

message.

The device must be charged immediately.

•

External voltage on the apex cable or contra-

angle. With this function, the device shows that

an electrical voltage is applied at the apex

connections. The external voltage can be

caused by defective devices or electrical

installations.

15. Warranty / Liability

Schlumbohm

warrants this product against defects in materials and workmanship for the

period of one year from the date of the original invoice. The product warrant provided by

Schlumbohm

includes the repair or the replacement of the entire device or individual parts.

The decision whether to replace or repair is entirely up to the manufacturer.

In the event of an alleged defect during warranty, the customer has to inform the

Schlumbohm

customer service immediately. The customer service will give further

instructions. Normally you will be asked to return the complete unit. The costs of returning

the product are at the sender’s expense.

Application errors exclude a warranty.

Schlumbohm

does not warrant for wear and contamination of the handpieces and contra-

angle. Schlumbohm

does not warrant for glass breakage on the display or damage to the

battery.

Schlumbohm

declines all responsibility for any damage caused by unsupervised device

operation.

Schlumbohm

declines all responsibility for any damage caused by improper packaging or

when shipping the device.

Schlumbohm

declines all responsibility for any damage caused as a result of the clinical

application of its products. Irrespective of whether or not such use is associated with other

medical devices (e.g. pacemakers).

Содержание 110 0607













































Результаты поиска

Содержание 110 0607

Отзывы:

Бренды по названию

Популярные бренды

Schlumbohm 110 0607, Руководство пользователя

Результаты поиска

Содержание 110 0607

Отзывы:

Бренды по названию

Популярные бренды