Schleuniger EcoCut 3300, Справочное руководство

Страница: 48 / 108

8. Operation of the control software
48|108
Reference Manual |Edition 4.0 (10-2013) |EcoCut 3300
8.7.1
Info
4-1
This screen contains the following information to the
EcoCut 3300 :
▄
Current software version
▄
The produced total wires
▄
Software version of the implemented optional PPI
(pre-/postfeed interface)
8.7.2
Machine
4-2
In the „Diagnosis Machine“ screen the functioning of
the following components is tested:
▄
Screen
▄
Keyboard
▄
Wire end switch
Screen
4-2-1
The menu item „Screen“ inverts the screen. This way the display can be checked for pixel errors.
Keyboard
4-2-2
Here the functioning of the keyboard is tested. There-
fore press any key that is shown under "Info 999 key: ...
“ is displayed (in the example the key [RUN] ).
Press
[MENU]
to terminate the keyboard test.
Wire end switch
4-2-3
Here the functioning of the wire end switch is tested.
Lifting up or releasing the wire end switch triggers a
modification of the "Info 999 wire end switch":
▄
0: indicates a non active cable end switch (in upper
position).
▄
1: indicates an active cable end switch (in lower
position).