Schleuniger CrimpCenter 64 SP Скачать руководство пользователя страница 91

Страница: 91 / 346

6. Safety elements / danger areas

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

91 | 268

6.3.1

Safety switch

DANGER

Danger of injury due to manipulation!

The safety cover switch is an elementary part of the safety concept!

There is a risk of getting burned!

The following instructions are to be followed!

The safety cover switch must under no circumstances be manipu-

lated and / or bridged!

NOTICE

Safety switch!

The safety switch ensures a safe and secure operation of the machine.

Fig. 28: Safety switch with latch

Safety switch

There is a safety switch with latch on the

machine.

It is not possible to produce, when the

safety cove is open.

Fig. 29: CrimpCenter 36 S - Safety switch

Safety switch - closed

If the operator opens the safety cover during

production, a safe stop is initiated.

The machine stops the production

immediately.
The motors are switched powerless.

Position of the safety switch

The safety switch is located inside the safety cover between the swivel arm and the con-

trol cabinet.

Содержание CrimpCenter 64 SP



























































































































































































































































































































































Результаты поиска

Содержание CrimpCenter 64 SP

Отзывы:

Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации, Страница: 91 / 346

Результаты поиска

Содержание CrimpCenter 64 SP

Отзывы: