Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации, Страница: 8 / 346

1. General
8 | 268
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
GENERAL
Thank you for your trust in Schleuniger technology! You have acquired a high performance
product from Schleuniger, carefully designed and manufactured in our factory. Read
through this manual with due care and attention. It contains important tips and safety
instructions, which allow precise and reliable wire/cable production.
1.1
MANUFACTURER
Schleuniger GmbH
Raiffeisenstrasse 14 Phone: +49 (0) 2195 929-0
42477 Radevormwald Fax: +49 (0) 2195 929-105
Germany Email: info@schleuniger.de
Web: www.schleuniger.com
1.2
VALIDITY
This manual is valid for the following machine/s :
Base machine (article number 467 918)
1.3
MANUFACTURING DATE/PRODUCT TYPE
See „Rating Plate“ .
1.4
INFORMATION ABOUT THE OPERATING INSTRUCTIONS
We have taken every possible measures to ensure the accuracy and completeness of this
documentation. Since errors can be avoided despite the diligence never fully, we are always
grateful for any advice and suggestions.
This manual is stated as "Operating Instructions” according to the machinery directive
2006/42/EU" and is part of the product. It contains all the relevant information necessary
to operate the product efficiently and safely as intended.
The following phases of the product life cycle are described:
●
Transport
●
Commissioning
●
Operating units
●
Maintenance
●
Disposal
Observe the safety regulations and instructions. The local accident preventions and safe-
ty regulations must be observed.
If the product changes hands, the Operating Instruction must be handed over to the
new owner.
Published modifications and corrections from the manufacturer must be complemented.
Inform at your local Schleuniger distributor.