Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации, Страница: 45 / 346

5. Product description
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
45 | 268
5.3
OPTIONAL EQUIPMENT
The CrimpCenter 64 SP has been configured and equipped according your individual needs.
Thanks to its modular design, it can be subsequently adapted to a changed individual
requirement of your production.
A number of stations and options allow a wide range of applications. You will get an insight
into this spectrum if you read on.
Notice
Constant improvements of our products are possible at any time.
Constant extensions of our products are possible at any time.
If any of your requirements are not listed, please contact your local
Schleuniger represen-
tative.
Your local Schleuniger representative will be glad to provide you with information about all
available products, all the latest news, as well as customized solutions for your individual
requirements.
5.3.1
Process
Processing Capabilities
The following table shows the applications that are possible with your CrimpCenter 64 SP .
Depending on the application, additional products may be needed.
Requirements for the application are indicated in each case.
Recommendations for additional application enhancement products, if any, are provi-
ded.
Notice
Not all applications are compatible with each other and / or can be used simultaneously.
Your local Schleuniger representative will gladly assist you with your individual configuration.
Crimp - Both ends
The wire is crimped on both sides.
Prerequisite
Crimping station - Side 1
Crimping station - Side 2
Crimp - Closed contacts - Both ends (split cycle)
The wire is crimped on both sides with closed contacts.
Prerequisite
Crimping station - Side 1
Crimping station - Side 2