Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации, Страница: 38 / 346

5. Product description
38 | 268
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
5.2
BASIC EQUIPMENT
Your CrimpCenter 64 SP is already equipped in the basic configuration with some functions,
which are described below. You will also get an overview of some elementary areas and
assemblies of your product.
Notice
Please note that your product can be adapted to the individual requirements of your
production.
A variety of optional stations and options allow a wide range of applications.
5.2.1
Process
Processing Capabilities
The following table shows the applications that are possible with your product.
Only standard applications are shown.
The functionality can be extended with stations.
The functionality can be extended with options.
If you would like to implement other applications on your product, please contact your local
Schleuniger representative . We offer you a customized solution.
Measure and cut to length
The wire is precisely measured and cut to length.
55 - 65 000 mm (65 m) | 2.16 - 2559.05 “ (213 ft)
Full strip - Both ends
The wire is completely stripped on both sides.
Side 1: 0,1 - 18 mm | 0.004 - 0.71 “
Side 2: 0,1 - 18 mm | 0.004 - 0.71 “
Partial strip - Both ends
A partial strip is carried out on both sides of the wire.
2-stage strip - Both ends
The wire is stripped in two stages on both sides.