Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации, Страница: 27 / 346

3. Transport / packaging / storage
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
27 | 268
Symbol Description Description
Center of gravity
This symbol is intended to clearly identify the position of
the center of gravity.
Hit here
The sign only gives an indication of where to strike but
not about the touch method. If the symbols are posi-
tioned equidistant from the center or the center of gravity,
the package will hang straight for equally long slings. If
this is not the case, the slings must be shortened on one
side.
3.3
TRANSPORT INSPECTION
Check the goods immediately after receiving for completeness and damages.
Proceed as follows, when there are visible transport damages:
Accept the delivery and note possible damages on the forwarding agent´s proof of deliv-
ery.
Determine extent of damage.
Immediately report damages on the machine.
NOTICE
Claim for damages!
The following instructions are to be followed!
Report any defect immediately after it was identified.
3.4
UNPACKING / LOADING
NOTICE
Packaging notice!
The following instructions are to be followed!
If provided, observe the packaging notice on the machine.
Lift the machine carefully from the wooden pallet by the help of a mechanical appliance.
Remove all transport locks (cable ties, cords, foamed plastics) and check for free move-
ment of all accessible cylinders and drives.
(if available, observe packaging notes)