Schleuniger CrimpCenter 64 SP Скачать руководство пользователя страница 250

Страница: 250 / 346

9. Servicing / Maintenance

250 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

9.14

MAINTENANCE SHEET - CONTROL CABINET - CHECK FILTER

Control Cabinet - Clean / Replace Filter

Task

Check the filter mats of the fans in the control cabinet, replace the

filter mats of the fans in the control cabinet.

Unit

Control cabinet - Filter elements

Duration

approx. 10 min.

Interval

Weekly

Personnel qualifica-

tion

Qualified Personnel

Parts

Slotted screwdriver

WARNING

Personnel Qualification and Personal Protective Equipment!

The following instructions are to be followed!

Maintenance work may only be executed by technical specialist.

See also chapter “Personnel Qualification” and “Personal Protective

Equipment”.

DANGER

Risk of injury if not observed!

You may suffer serious injuries, if the machine is switched on acciden-

tally!

The following instructions are to be followed!

Prior to operating the following points have to be observed:

Put the main switch in position "OFF"!
Protect the machine against reactivation.
Take appropriate measures to ensure, that only you can reactivate

the machine.
Affix a warning sign: "Do not switch on the Machine!"

NOTICE

Change interval of the filters!

There are no fixed rules how often the filters have to be changed.
The interval depends on the operating environment where the

machine is operated.

Содержание CrimpCenter 64 SP



























































































































































































































































































































































Результаты поиска

Содержание CrimpCenter 64 SP

Отзывы:

Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации, Страница: 250 / 346

Результаты поиска

Содержание CrimpCenter 64 SP

Отзывы: