Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации, Страница: 23 / 346

2. Safety
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
23 | 268
Do not make any modifications to the machine and only utilize it for its intended pur-
pose according to section "2.4 Intended usage of product (Page 19)" .
Other applications are only permitted with written approval of the manufacturer.
The manufacturer will accept no liability for damages resulting from disregard of this
regulation.
Never switch on the machine during repair work.
Never deactivate or bypass the safety circuits, if the machine does not work correctly.
In this case switch off the machine and contact your Schleuniger service partner.
Processing stations may only be put into operation when tightly mounted on the provi-
ded substructure by Schleuniger.
Only use original Schleuniger equipment, especially interface connection cables (electro-
magnetic compatibility).
Compulsory operate the product through the Schleuniger emergency stop circuit, if it is
operated together with peripheral devices in a production line. Only then can a safe
interruption of the complete production line be guaranteed during an emergency.
Use lubricants lubricants solely according to the specifications in the manual.
Any modification of the safety equipment is strictly forbidden.
Failure to do so may result in serious injury or death.
Never operate the product in environments where there is a risk of fire or explosion.
Operate the product only in dry, dust-free rooms.
Take care that the work area is sufficiently illuminated.
Through an increased noise level the communication of personnel can be more compli-
cated.
Through this hazards can occur.
The CrimpCenter complies with the noise protection regulations.
In combination with other machines a permissible noise level can be reached. In this
case the operator has to place a mandatory-sign "Wear ear protection".
2.10
SOURCES OF DANGER / RESIDUAL RISKS
Danger due to catching body parts and clothing in the wire axis between peripheral
devices and the wire processing machine.
●
Always close off these areas
Danger due to blocked wire/cable on the inlet. Tensile forces can move to overturn
machine, peripheral or bobbin and injure the operator personnel.
●
Fixate machines and devices
●
Ensure a continuing wire/cable supply
Danger of tripping, falling and slipping caused by connecting cables, wire waste, air
hoses and objects lying on the floor.
●
Install wires and hoses orderly arranged
●
Catch wire waste
●
Keep work area clear from objects scattered about
Risk of tripping, falling and slipping on the ground.
●
The floor must be technically proper and maintained.