Schleuniger CrimpCenter 64 SP Скачать руководство пользователя страница 226

Страница: 226 / 346

9. Servicing / Maintenance

226 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

9.7

MAINTENANCE SHEET - SURFACE CLEANING AND PREVENTION

Surfaces - Cleaning and Care

Task

Clean and maintain surfaces.

Unit

Entire machine

Duration

approx. 30 min.

Interval

Weekly

Personnel qualifica-

tion

Qualified Personnel

WARNING

Personnel Qualification and Personal Protective Equipment!

The following instructions are to be followed!

Maintenance work may only be executed by technical specialist.

See also chapter “Personnel Qualification” and “Personal Protective

Equipment”.

DANGER

Risk of injury if not observed!

You may suffer serious injuries, if the machine is switched on acciden-

tally!

The following instructions are to be followed!

Prior to operating the following points have to be observed:

Put the main switch in position "OFF"!
Protect the machine against reactivation.
Take appropriate measures to ensure, that only you can reactivate

the machine.
Affix a warning sign: "Do not switch on the Machine!"

NOTICE

Property damage due to hand sweat!

Hand sweat is very aggressive.

The following instructions are to be followed!

Please be sure that any surface that is frequently touched or leaned

on is cleaned frequently!

Содержание CrimpCenter 64 SP



























































































































































































































































































































































Результаты поиска

Содержание CrimpCenter 64 SP

Отзывы:

Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации, Страница: 226 / 346

Результаты поиска

Содержание CrimpCenter 64 SP

Отзывы: