Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации, Страница: 195 / 346

9. Servicing / Maintenance
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
195 | 268
9.4
MAINTENANCE TABLE: BASE MACHINE
Maintenance work must be accomplished according to the instructions and the time inter-
vals listed. Generally proceed according to the following chart:
Maintenance intervals - Conversion
Most maintenance cycles are time based. To associate the processing time with the machine
cycles, the following table has been developed.
Notice
No matter which of the two specifications is reached first, then the specified maintenance
activity has to be performed!
Intervals - Time Intervals - Cycle Quantity
per shift 5 700 Shift / Day 3
Daily 17 100 Days / Week 6
Weekly 102 600 Weeks / Month 4
Monthly 410 400 Weeks / Year 49
Yearly 5 000 000 Month / Year 12
Examples
1. Example
The maintenance activity was defined to be performed daily ( 17 100 cycles).
You only went through
15 000
cycles that day.
»The maintenance activity must be carried out the next day or for the next day as the specifi-
cation has been reached daily .
2. Example
The maintenance activity was defined to be performed weekly ( 102 600 cycles).
They went through
102 600
cycles on Day 4 of the week.
»The maintenance activity must be carried out before you continue to produce, since the
specification 102 600 cycles has been reached.