Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации, Страница: 103 / 346

7. Installation / Mounting
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
103 | 268
Fig. 39: Bracket 1 - Dual ToolingShulttle
Fig. 40: Bracket 2 - Dual ToolingShulttle
1.
▹
Loosen the quick release and remove
the disc.
» Keep these.
2.
▹
Position the bracket in alignment with
the mounting holes.
» Hold the position.
3.
▹
Slide the ring onto the holder.
4.
▹
Insert the marked screws.
» Tighten the screw(s).
5.
▹
Slide the disc onto the holder and tight-
en the quick release.
6.
▹
Position the bracket in alignment with
the mounting holes.
» Hold the position.
7.
▹
Insert the marked screws.
» Tighten the screw(s).