Schleuniger CoaxCenter 6000, Справочное руководство, Страница: 69 / 194

7. General handling / operation
Reference Manual |Edition 5.0 (09-2016) | CoaxCenter 6000
69 | 194
Key State Key State
Key pressed Key not pressed
Screen selected Screen available
Tab selected Tab available
7.5.3
Production keys / machine state / info area
In the header area the production keys for the production control are residing. Right of it general sta-
tus messages are shown.
Above the info area there are important infos like system date/time and the global processing speed.
There are also keys for the display of the "About" screen (information to the software version and oth-
ers), and for logging-on to a different user level.
7.5.4
Navigation area
In the upper part within the navigation area, the selection keys for the main screens are located.
As there is often not enough space on the main screen to display all functions, the various screens
often contain additional tabs (e. g. the Processing editor).
Main screens
Header line
Tabs
Main screens
1
2
3 4
5
6 7
1
Article editor Article programming (Raw Material, Processing, end application),
production, production state, inspection Q-Cam 360 .
2
Contact library Library for the crimp terminals
3
Configuration PreFeeder, guides, Station (feeding unit, swivel arm, cutting unit,
rotary incising unit), stacker, ETHERNET-interface, Time/Date, touch
screen.
4
User User interface (language, units, Time/Date), user level management.