Schleuniger CoaxCenter 6000, Справочное руководство, Страница: 47 / 194

5. Product description
Reference Manual |Edition 5.0 (09-2016) | CoaxCenter 6000
47 | 194
ETHERNET connector
The CoaxCenter 6000 can be connected directly or via a company network to a PC through the ETHER-
NET connector. Therewith pictures from the produced article made by the Q-Cam 360 can this way be
analyzed on the PC. For analysis on the PC, there is a special software needed. Hence such a software
is not available yet.
Memory card slot
Here a 2 GB CFast Typ memory card can be plugged-in. This way configuration data of the control
software and others can permanently be saved.
5.4
DELIVERY / ACCESSORIES
Exclusively use original spare parts of the manufacturer. See „Packing list (Register 1)“ and document
„Parts Catalog“ .
5.4.1
Accessories
The CoaxCenter 6000 standardly is delivered with the following accessories. Depending on the config-
uration of the processing stations, there is additional accessories available.
■
Power cord
■
Adapter compressed air supply
■
Key locker Ethernet
■
Spring to rotary incising unit
■
Entry guide set
■
Spare screws rotary incising unit
■
Replacement fuses mains power
■
Seegerring pliers
■
Screwdriver
■
Tweezers
■
Guide set for swivel arm
The guide sets contain the following guide diameters:
2.2 mm (contained 1.2 and 2.2), 3.6 mm, 5.8 mm.
5.4.2
Options
See chapter "5.1 Concept (Page 29)" .