WCO100 Camera MAC ID
Twelve (12) characters
0 0 0 E
24129744
WCO100 Schlage Home
Outdoor Camera
1
Attach antenna to the camera
• Turn the antenna clockwise on the antenna mount.
• The antenna should be in an upright position for best
signal reception.
Final position,
upright
2
Locate MAC ID, Ethernet and Power.
Write the MAC ID in the box at the top of this page for later reference.
DO NOT plug in Ethernet or power before enrolling!
3
Log into your account at www.mynexia.com
• Camera can be used only with Nexia Home Intelligence system.
• Account must be active before continuing. See
nexiahome.com
for more information.
4
Enroll the Camera
a.
Make sure Ethernet and power are NOT plugged into camera before you begin.
b.
On www.mynexia.com, click the
Cameras
tab.
Note: If this is a new account:
Select “Schlage Home Outdoor Camera” in the Enrollment list. Follow on-screen instructions.
c.
Click the
Add Camera
button.
d.
Follow the on-screen instructions.
e.
Click on
Edit Camera Settings
to complete wireless setup.
Microphone
(not used)
PIR Sensor
Power LED
Lens
MAC ID
Ethernet
Port
Power
Port
Reset Button
Antenna
Light
Sensor
Package Contents:
• Outdoor Camera
• External Antenna
• 56 inch (142 cm) Power Adapter
• Swivel Connector
• Mounting Stand
• Mounting Base
• Mounting Screws (3)
• Ethernet Cable (with water sealing cap)
• 118 inch (300 cm) Power Extension Cable
