Schlage CO-200, Инструкция по эксплуатации

Страница: 7 / 16

7
CO-200 Offl ine Lock User Guide
Manual Programming Commands

Commands are confi rmed by fi ve alternating green blinks of the Schlage button.

The right LED on the Schlage button will blink green to indicate an incorrect entry. To interpret blink
patterns, refer to Error Codes on page 9.
Function Press/Present
Wait For
Confi rmation
1
Change
[Programming Code]
[Programming Code]
OR Programming Card
Wait for
to stop flashing
between each
step.
New [Programming Code]
New [Programming Code]
Change
Programming Card
[Programming Code]
OR Programming Card
Wait for
to stop flashing
between each
step.
New Programming Card
Add Normal Use
Credential
[Programming Code]
OR Programming Card
Wait for
to stop flashing
between each
step.
New [PIN]
(for PIN only)
OR New Card
add another credential OR
to finish
Add Normal Use
+PIN Credential
[Programming Code]
OR Programming Card
Wait for
to stop flashing
between each
step.
New [PIN]
New Card
add another credential OR
to finish
Add Toggle
Credential
[Programming Code]
OR Programming Card
Wait for
to stop flashing
between each
step.
New [PIN]
(for PIN only)
OR New Card
add another credential OR
to finish
Add PIN
Credential
[Programming Code]
OR Programming Card
Wait for
to stop flashing
between each
step.
New [PIN]
New Card
add another credential OR
to finish
Add Freeze
Credential
[Programming Code]
OR Programming Card
Wait for
to stop flashing
between each
step.
New [PIN]
(for PIN only)
OR New Card
add another credential OR
to finish
1 Other lights may show before the fi nal confi rmation. Wait for fi nal confi rmation before continuing to the next step.