MVPHD-24 Operations Manual Version 0.9.0 page 43 of 74
October 26, 2020
Proc Amp:
(FUTURE RELEASE)
The
Proc Amps
menu tab contains controls for adjusting the selected video input.
Note: these controls apply to the video signal before images are captured for stills or freezing.
The
Proc Amp Controls
button is used to enable or disable all four Proc Amp controls.
When set to
ON
, the Proc Amp controls are active. When set to
OFF
, the Proc Amp controls are bypassed
(unity gain) and any control settings are ignored.
Use the
Setup
control to adjust the video signal’s brightness.
Use the
Video Level
control to adjust the video signal’s contrast.
Use the
Chroma
control to adjust the video signal’s color saturation.
Use the
Hue
control to adjust the video signal’s color hue (or chroma phase).
Use the
Hue Mode
control to select which method is used to calculate hue.
The
Component Hue
setting calculates the video hue based on equal scaling of the x,y color
space. This method is typically used in component digital equipment.
The
Composite Hue
setting calculates the video hue based on the unequal scaling of NTSC/PAL
color space. This method more closely resembles a traditional NTSC hue control.
Clicking on the
Default
button will set all four Proc Amp controls to their default values (unity gain).
